标题:QT没有界面,只有企鹅
作者:tomtony
日期:2009-11-09 09:19
内容:
我的硬件平台是2410
我用qtopia-core-opensource-src-4.3.3有界面有鼠标
然后编译qtopia-opensource-src-4.2.1和qtopia-opensource-src-4.3.3都是./qpe -qws后
Reading data from NAND FLASH without ECC is not recommended
**********************************************************
* ERROR: Expecting this binary to be located in
* /mnt/usb/Trolltech/QtopiaCore-4.3.3/bin/qpe
* but it is being run from
* CANNOT READ /proc/735/exe
*
* This generally indicates that you have specified the wrong
* value for -prefix when configuring Qtopia. Based on the
* location of this binary, you should be using a prefix of
*
**********************************************************
[9;0][?33l[?25l[?1c[9;15][?33h[?25h[?0c
#
#
#
#
现象是自动退出了,我在后面回车就会出现#
屏幕左上只有那个小企鹅,其他地方都是黑的
请教大家怎么回事?
#1 [xubindonghu 11-09 14:34]
QT没有运行
#2 [xubindonghu 11-09 14:36]
你重新做一下文件系统看看