标题:求qtopia2.2的configure参数设置
作者:windytwang
日期:2006-04-14 23:39
内容:
很多参数,不知道怎么设置(我的qte是3.3.4的)
我的开发板是arm结构
(在qtopia及dt2目录下的mkspecs里都没有看到arm-linux-g++或linux-arm-g++目录)
Usage:configure [-qte 'cfg'] [-qpe 'cfg'] [-libpath path] [-prefix path]
[-debug] [-qtopiadesktop] [-dprefix path]
[-qt2 'cfg'] [-dqt 'cfg']
-qte cfg ....... Specifies the configuration to use for building
Qt/Embedded. For a full description of all possible Qt
configuration options type:
/work/qtopia-free-2.2.0/qt2/configure -help
or read the getting started section in the online
reference manual which can be found at:
/work/qtopia-free-2.2.0/qtopia/doc/html/index.html
For your convenience you can also use one of the following shortcuts as the cfg value which will then be replaced
with the full configuration listed after the shortcut:
keypad '-embedded -no-xft -qconfig qpe -qvfb -depths 4,8,16,32 -keypad-mode -system-jpeg -gif'
arm-keypad '-embedded -no-xft -xplatform linux-sharp-g++ -qconfig qpe-keypad-mode -depths 16,32 -no-qvfb -system-jpeg -gif'
no-keypad '-embedded -no-xft -qconfig qpe -qvfb -depths 4,8,16,32 -system-jpeg -gif -D QT_TRANSFORM_VFB'
arm-no-keypad '-embedded -no-xft -xplatform linux-sharp-g++ -qconfig qpe-depths 16,32 -no-qvfb -system-jpeg -gif'
& ..
#1 [linuzer 04-16 07:39]
你可以到不同的子目录下分别./configure --help一下
另外可以使用shucut,比如
./configure -qte arm-no-keypad -qpe arm-pda等等
还可以修改configure文件把默认的配置arm-no-keypad,arm-pda进行修改
#2 [vbgood 04-20 14:17]
你们谁把Qtopia2.2.0编译成功了呀
我老是编译不成功的。