我把板子提供的fs2410xp.cramfs mount到主机(red hat 9.0),然后加入自己的qte编的应用程序,再把整个文件夹生成mycram.cramfs文件烧回板子,启动时提示:
Please press Enter to activate this console. /usr/etc/rc.local: line 9: /.bashrc: No such file or directory
Reading data from NAND FLASH without ECC is not recommended
/bin/cp: will not create hard link `/tmp/Applications/Network/modules' to directory `/tmp/Applications/AlarmServer'
/bin/cp: will not create hard link `/tmp/Documents' to directory `/tmp/Applications/qimpen'
Could not open mime.types file, "etc/mime.types", for reading
/Qtopia/qtopia-free-1.7.0/bin/qpe: error while loading shared l
Please press Enter to activate this console.
Reading data from NAND FLASH without ECC is not recommended
bash-2.05b#
然后就不动了,也进不了系统,我把原来的fs2410.cramfs重新烧回去,就又可以启动进去了,相应的提示为:
/bin/cp: will not create hard link `/tmp/Applications/Network/modules' to directory `/tmp/Applications/AlarmServer'
/bin/cp: will not create hard link `/tmp/Documents' to directory `/tmp/Applications/qimpen'
Could not open mime.types file, "etc/mime.types", for reading
Reading data from NAND FLASH without ECC is not recommended
Reading data from NAND FLASH without ECC is not recommended
Reading data from NAND FLASH without ECC is not recommended
[9;0][?33l[?25l[?25lReading data from NAND FLASH without ECC is not recommended
Could not read calibration: /etc/pointercal
Create pluginlibman in libqpe
Reading data from NAND FLASH without ECC is not recommended
Reading data from NAND FLASH without ECC is not recommended
Use QPEApplication's PluginLibraryManager
Reading data from NAND FLASH without ECC is not recommended
Reading data from NAND FLASH without ECC is not recommended
Setting up QCop to QPE/System
channel QPE/Card added
channel QPE/Server added
channel QPE/IME added
Reading data from NAND FLASH without ECC is not recommended
Reading data from NAND FLASH without ECC is not recommended
Create pluginlibman in libqpe
Use QPEApplication's PluginLibraryManager
QuickLauncher running
channel QPE/Application/quicklauncher added
channel QPE/QuickLauncher-54 added
Registered QPE/QuickLauncher-54
Reading data from NAND FLASH without ECC is not recommended
差别就是这句:/Qtopia/qtopia-free-1.7.0/bin/qpe: error while loading shared l
怀疑环境变量没设好,进入bashrc没发现相关的环境变量设置,于是我加入了板子上对应的环境变量,重新烧cramfs,但是又出现上面的问题,仍然无法启动。
这是怎么回事呢?
[ 此贴被XChinux在2006-04-11 23:10重新编辑 ]