Booting Linux ...
Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00300000 ...
Bad block at 0x4a0000 ,will be skipped
Copy Kernel to SDRAM done,NOW, Booting Linux......
Uncompressing Linux.............................................................
Linux version 2.6.30.4-EmbedSky (root@wzk-Lenovo) (gcc version 4.3.3 (Sourcery 1
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: SMDK2440
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0
NR_IRQS:85
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60864KB available (3392K code, 379K data, 128K init, 0K highmem)
Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 936 bytes
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 97 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
JFFS2 version 2.2. (NAND) (SUMMARY)
No filesystem could mount root, tried: ext3 ext2 cramfs vfat msdos iso9660 roms
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)
[<c002e71c>] (unwind_backtrace+0x0/0xdc) from [<c02aa2a4>] (panic+0x40/0x110)
[<c02aa2a4>] (panic+0x40/0x110) from [<c0008fcc>] (mount_block_root+0x1d0/0x210)
[<c0008fcc>] (mount_block_root+0x1d0/0x210) from [<c0009264>] (prepare_namespac)
[<c0009264>] (prepare_namespace+0x164/0x1bc) from [<c0008598>] (kernel_init+0xb)
[<c0008598>] (kernel_init+0xb4/0xe0) from [<c004b8bc>] (do_exit+0x0/0x578)
[<c004b8bc>] (do_exit+0x0/0x578) from [<00000001>] (0x1)