liudianwu |
2019-07-14 21:52 |
Qt编写自定义控件30-颜色多态按钮
一、前言 这个控件一开始打算用样式表来实现,经过初步的探索,后面发现还是不够智能以及不能完全满足需求,比如要在此控件设置多个角标,这个用QSS就很难实现,后面才慢慢研究用QPainter来绘制,我记得当时接到这个定制控件任务的时候是2016年,那时候对QPainter的使用还不是很熟悉,也就是从此控件开始,逐步研究QPainter的绘制,把所有的内置函数都使用一遍,最终用的越来越熟悉,使得后来到了心中有坐标,万物皆painter的境界,可能就像武林中所说的打通了任督二脉吧。 本控件除了可以设置常规的圆角角度,边框宽度,边框颜色,正常颜色,按下颜色以外,还可以设置各个角标和正文文字内容/字体/对齐方式/颜色,同时还要提供三种颜色展示模式,松开按下两种颜色,按下松开颜色上下交替,按下松开颜色渐变交替。QLinearGradient是个好东西,各种颜色交替效果全靠它来实现。
二、实现的功能 * 1:可设置圆角角度,边框宽度 * 2:可设置角标和正文文字内容/字体/对齐方式/颜色 * 3:可设置边框颜色,正常颜色,按下颜色 * 4:可设置背景图片 * 5:可设置按钮颜色模式
三、效果图
四、头文件代码
- #ifndef COLORBUTTON_H
#define COLORBUTTON_H
/** * 多样式超级按钮控件 作者:feiyangqingyun(QQ:517216493) 2017-9-24 * 1:可设置圆角角度,边框宽度 * 2:可设置角标和正文文字内容/字体/对齐方式/颜色 * 3:可设置边框颜色,正常颜色,按下颜色 * 4:可设置背景图片 * 5:可设置按钮颜色模式 */
#include <QWidget>
#ifdef quc #if (QT_VERSION < QT_VERSION_CHECK(5,7,0)) #include <QtDesigner/QDesignerExportWidget> #else #include <QtUiPlugin/QDesignerExportWidget> #endif
class QDESIGNER_WIDGET_EXPORT ColorButton : public QWidget #else class ColorButton : public QWidget #endif
{ Q_OBJECT Q_ENUMS(ColorMode) Q_ENUMS(TextAlign) Q_PROPERTY(int borderRadius READ getBorderRadius WRITE setBorderRadius) Q_PROPERTY(int borderWidth READ getBorderWidth WRITE setBorderWidth) Q_PROPERTY(QColor borderColor READ getBorderColor WRITE setBorderColor)
Q_PROPERTY(bool showSuperText READ getShowSuperText WRITE setShowSuperText) Q_PROPERTY(QString superText READ getSuperText WRITE setSuperText) Q_PROPERTY(QFont superTextFont READ getSuperTextFont WRITE setSuperTextFont) Q_PROPERTY(TextAlign superTextAlign READ getSuperTextAlign WRITE setSuperTextAlign) Q_PROPERTY(QColor superTextColor READ getSuperTextColor WRITE setSuperTextColor)
Q_PROPERTY(QString text READ getText WRITE setText) Q_PROPERTY(QFont textFont READ getTextFont WRITE setTextFont) Q_PROPERTY(TextAlign textAlign READ getTextAlign WRITE setTextAlign) Q_PROPERTY(QColor textColor READ getTextColor WRITE setTextColor)
Q_PROPERTY(QColor normalColor READ getNormalColor WRITE setNormalColor) Q_PROPERTY(QColor pressedColor READ getPressedColor WRITE setPressedColor)
Q_PROPERTY(bool canMove READ getCanMove WRITE setCanMove) Q_PROPERTY(QPixmap bgImage READ getBgImage WRITE setBgImage) Q_PROPERTY(ColorMode colorMode READ getColorMode WRITE setColorMode)
public: enum ColorMode { ColorMode_Normal = 0, //松开按下两种颜色 ColorMode_Replace = 1, //按下松开颜色上下交替 ColorMode_Shade = 2 //按下松开颜色渐变交替 };
enum TextAlign { TextAlign_Top_Left = 0, TextAlign_Top_Center = 1, TextAlign_Top_Right = 2, TextAlign_Center_Left = 3, TextAlign_Center_Center = 4, TextAlign_Center_Right = 5, TextAlign_Bottom_Left = 6, TextAlign_Bottom_Center = 7, TextAlign_Bottom_Right = 8 };
explicit ColorButton(QWidget *parent = 0);
protected: void mousePressEvent(QMouseEvent *);
protected: bool eventFilter(QObject *watched, QEvent *event); void paintEvent(QPaintEvent *); void drawBg(QPainter *painter); void drawText(QPainter *painter);
private: int borderRadius; //圆角半径 int borderWidth; //边框宽度 QColor borderColor; //边框颜色
bool showSuperText; //显示角标 QString superText; //角标文字 QFont superTextFont; //角标文字字体 TextAlign superTextAlign; //角标文字对齐方式 QColor superTextColor; //角标文字颜色
QString text; //文字 QFont textFont; //文字字体 TextAlign textAlign; //文字对齐方式 QColor textColor; //文字颜色
QColor normalColor; //正常颜色 QColor pressedColor; //按下颜色
bool canMove; //是否能移动 QPixmap bgImage; //背景图片 ColorMode colorMode; //背景色模式
bool isPressed; //是否按下
public: int getBorderRadius() const; int getBorderWidth() const; QColor getBorderColor() const;
bool getShowSuperText() const; QString getSuperText() const; QFont getSuperTextFont() const; TextAlign getSuperTextAlign()const; QColor getSuperTextColor() const;
QString getText() const; QFont getTextFont() const; TextAlign getTextAlign() const; QColor getTextColor() const;
QColor getNormalColor() const; QColor getPressedColor() const;
bool getCanMove() const; QPixmap getBgImage() const; ColorMode getColorMode() const;
QSize sizeHint() const; QSize minimumSizeHint() const;
public Q_SLOTS: //设置边框圆角角度 void setBorderRadius(int borderRadius); //设置边框宽度 void setBorderWidth(int borderWidth); //设置边框颜色 void setBorderColor(const QColor &borderColor);
//设置是否显示角标 void setShowSuperText(bool showSuperText); //设置角标文字 void setSuperText(const QString &superText); //设置角标文字字体 void setSuperTextFont(const QFont &superTextFont); //设置角标文字对齐方式 void setSuperTextAlign(const TextAlign &superTextAlign); //设置角标文字颜色 void setSuperTextColor(const QColor &superTextColor);
//设置文字 void setText(const QString &text); //设置文字字体 void setTextFont(const QFont &textFont); //设置文字对齐方式 void setTextAlign(const TextAlign &textAlign); //设置文字颜色 void setTextColor(const QColor &textColor);
//设置正常颜色 void setNormalColor(const QColor &normalColor); //设置按下颜色 void setPressedColor(const QColor &pressedColor);
//设置是否可以移动 void setCanMove(bool canMove); //设置背景图片 void setBgImage(const QPixmap &bgImage); //设置颜色模式 void setColorMode(const ColorMode &colorMode);
Q_SIGNALS: void clicked(); };
#endif // WKBUTTON_H
五、核心代码
- bool ColorButton::eventFilter(QObject *watched, QEvent *event)
{ if (!isEnabled()) { return QWidget::eventFilter(watched, event); }
static QPoint lastPoint;
if (event->type() == QEvent::MouseButtonPress) { QMouseEvent *e = static_cast<QMouseEvent *>(event); if (this->rect().contains(e->pos()) && (e->button() == Qt::LeftButton)) { lastPoint = e->pos(); isPressed = true; update(); } } else if (event->type() == QEvent::MouseMove && isPressed && canMove) { QMouseEvent *e = static_cast<QMouseEvent *>(event); int dx = e->pos().x() - lastPoint.x(); int dy = e->pos().y() - lastPoint.y(); this->move(this->x() + dx, this->y() + dy); return true; } else if (event->type() == QEvent::MouseButtonRelease && isPressed) { isPressed = false; update(); }
return QWidget::eventFilter(watched, event); }
void ColorButton::paintEvent(QPaintEvent *) { //绘制准备工作,启用反锯齿 QPainter painter(this); painter.setRenderHints(QPainter::Antialiasing | QPainter::TextAntialiasing);
//绘制背景 drawBg(&painter); //绘制文字 drawText(&painter); }
void ColorButton::drawBg(QPainter *painter) { painter->save();
//设置边框颜色及宽度 QPen pen; pen.setColor(borderColor); pen.setWidthF(borderWidth); painter->setPen(pen);
//绘制区域要减去边框宽度 QRect rect; rect.setX(borderWidth); rect.setY(borderWidth); rect.setWidth(width() - borderWidth * 2); rect.setHeight(height() - borderWidth * 2);
//如果背景图片存在则显示背景图片,否则显示背景色 if (!bgImage.isNull()) { //等比例缩放绘制 QPixmap img = bgImage.scaled(rect.width(), rect.height(), Qt::KeepAspectRatio, Qt::SmoothTransformation); painter->drawPixmap((this->rect().width() - img.width()) / 2, (this->rect().height() - img.height()) / 2, img); } else { if (colorMode == ColorMode_Normal) { if (isPressed) { painter->setBrush(QBrush(pressedColor)); } else { painter->setBrush(QBrush(normalColor)); } } else if (colorMode == ColorMode_Replace) { QLinearGradient gradient(QPoint(0, 0), QPoint(0, height()));
if (isPressed) { gradient.setColorAt(0.0, pressedColor); gradient.setColorAt(0.49, pressedColor); gradient.setColorAt(0.50, normalColor); gradient.setColorAt(1.0, normalColor); } else { gradient.setColorAt(0.0, normalColor); gradient.setColorAt(0.49, normalColor); gradient.setColorAt(0.50, pressedColor); gradient.setColorAt(1.0, pressedColor); }
painter->setBrush(gradient); } else if (colorMode == ColorMode_Shade) { QLinearGradient gradient(QPoint(0, 0), QPoint(0, height()));
if (isPressed) { gradient.setColorAt(0.0, pressedColor); gradient.setColorAt(1.0, normalColor); } else { gradient.setColorAt(0.0, normalColor); gradient.setColorAt(1.0, pressedColor); }
painter->setBrush(gradient); }
painter->drawRoundedRect(rect, borderRadius, borderRadius); }
painter->restore(); }
void ColorButton::drawText(QPainter *painter) { if (!bgImage.isNull()) { return; }
painter->save();
//如果要显示角标,则重新计算显示文字的区域 if (showSuperText) { int offset = 3; QRect rect; rect.setX(borderWidth * offset); rect.setY(borderWidth); rect.setWidth(width() - borderWidth * offset * 2); rect.setHeight(height() - borderWidth * 2);
Qt::Alignment alignment = Qt::AlignCenter; if (superTextAlign == TextAlign_Top_Left) { alignment = Qt::AlignTop | Qt::AlignLeft; } else if (superTextAlign == TextAlign_Top_Center) { alignment = Qt::AlignTop | Qt::AlignHCenter; } else if (superTextAlign == TextAlign_Top_Right) { alignment = Qt::AlignTop | Qt::AlignRight; } else if (superTextAlign == TextAlign_Center_Left) { alignment = Qt::AlignLeft | Qt::AlignVCenter; } else if (superTextAlign == TextAlign_Center_Center) { alignment = Qt::AlignHCenter | Qt::AlignVCenter; } else if (superTextAlign == TextAlign_Center_Right) { alignment = Qt::AlignRight | Qt::AlignVCenter; } else if (superTextAlign == TextAlign_Bottom_Left) { alignment = Qt::AlignBottom | Qt::AlignLeft; } else if (superTextAlign == TextAlign_Bottom_Center) { alignment = Qt::AlignBottom | Qt::AlignHCenter; } else if (superTextAlign == TextAlign_Bottom_Right) { alignment = Qt::AlignBottom | Qt::AlignRight; }
//绘制角标 painter->setPen(superTextColor); painter->setFont(superTextFont); painter->drawText(rect, alignment, superText); }
int offset = 5; QRect rect; rect.setX(borderWidth * offset); rect.setY(borderWidth); rect.setWidth(width() - borderWidth * offset * 2); rect.setHeight(height() - borderWidth * 2);
Qt::Alignment alignment = Qt::AlignCenter; if (textAlign == TextAlign_Top_Left) { alignment = Qt::AlignTop | Qt::AlignLeft; } else if (textAlign == TextAlign_Top_Center) { alignment = Qt::AlignTop | Qt::AlignHCenter; } else if (textAlign == TextAlign_Top_Right) { alignment = Qt::AlignTop | Qt::AlignRight; } else if (textAlign == TextAlign_Center_Left) { alignment = Qt::AlignLeft | Qt::AlignVCenter; } else if (textAlign == TextAlign_Center_Center) { alignment = Qt::AlignHCenter | Qt::AlignVCenter; } else if (textAlign == TextAlign_Center_Right) { alignment = Qt::AlignRight | Qt::AlignVCenter; } else if (textAlign == TextAlign_Bottom_Left) { alignment = Qt::AlignBottom | Qt::AlignLeft; } else if (textAlign == TextAlign_Bottom_Center) { alignment = Qt::AlignBottom | Qt::AlignHCenter; } else if (textAlign == TextAlign_Bottom_Right) { alignment = Qt::AlignBottom | Qt::AlignRight; }
painter->setPen(textColor); painter->setFont(textFont); painter->drawText(rect, alignment, text);
painter->restore(); }
六、控件介绍 1. 超过149个精美控件,涵盖了各种仪表盘、进度条、进度球、指南针、曲线图、标尺、温度计、导航条、导航栏,flatui、高亮按钮、滑动选择器、农历等。远超qwt集成的控件数量。 2. 每个类都可以独立成一个单独的控件,零耦合,每个控件一个头文件和一个实现文件,不依赖其他文件,方便单个控件以源码形式集成到项目中,较少代码量。qwt的控件类环环相扣,高度耦合,想要使用其中一个控件,必须包含所有的代码。 3. 全部纯Qt编写,QWidget+QPainter绘制,支持Qt4.6到Qt5.12的任何Qt版本,支持mingw、msvc、gcc等编译器,支持任意操作系统比如windows+linux+mac+嵌入式linux等,不乱码,可直接集成到Qt Creator中,和自带的控件一样使用,大部分效果只要设置几个属性即可,极为方便。 4. 每个控件都有一个对应的单独的包含该控件源码的DEMO,方便参考使用。同时还提供一个所有控件使用的集成的DEMO。 5. 每个控件的源代码都有详细中文注释,都按照统一设计规范编写,方便学习自定义控件的编写。 6. 每个控件默认配色和demo对应的配色都非常精美。 7. 超过130个可见控件,6个不可见控件。 8. 部分控件提供多种样式风格选择,多种指示器样式选择。 9. 所有控件自适应窗体拉伸变化。 10. 集成自定义控件属性设计器,支持拖曳设计,所见即所得,支持导入导出xml格式。 11. 自带activex控件demo,所有控件可以直接运行在ie浏览器中。 12. 集成fontawesome图形字体+阿里巴巴iconfont收藏的几百个图形字体,享受图形字体带来的乐趣。 13. 所有控件最后生成一个dll动态库文件,可以直接集成到qtcreator中拖曳设计使用。 14. 目前已经有qml版本,后期会考虑出pyqt版本,如果用户需求量很大的话。
七、SDK下载 - SDK下载链接:https://pan.baidu.com/s/1A5Gd77kExm8Co5ckT51vvQ 提取码:877p - 下载链接中包含了各个版本的动态库文件,所有控件的头文件,使用demo,自定义控件+属性设计器。 - 自定义控件插件开放动态库dll使用(永久免费),无任何后门和限制,请放心使用。 - 目前已提供26个版本的dll,其中包括了qt5.12.3 msvc2017 32+64 mingw 32+64 的。 - 不定期增加控件和完善控件,不定期更新SDK,欢迎各位提出建议,谢谢! - widget版本(QQ:517216493)qml版本(QQ:373955953)三峰驼(QQ:278969898)。 - 涛哥的知乎专栏 Qt进阶之路 https://zhuanlan.zhihu.com/TaoQt - 欢迎关注微信公众号【高效程序员】,C++/Python、学习方法、写作技巧、热门技术、职场发展等内容,干货多多,福利多多!
|
|