• 4445阅读
  • 0回复

关于在linux下蓝牙设备的使用 [复制链接]

上一主题 下一主题
离线swin1223
 
只看楼主 倒序阅读 楼主  发表于: 2010-05-09
各位,请教大家一个问题,就是在linux下安装完蓝牙,在内核中已经进行了关于蓝牙的配置,并且安装了bulez-lib,使用hciconfig明明显示蓝牙激活,但是使用hcitool scan去搜寻其他蓝牙设备时,却总是搜寻不到..这是为什么...?

[root@localhost bluetooth]# hciconfig -a
hci0:   Type: USB
        BD Address: 00:11:67:60:21:D0 ACL MTU: 678:8 SCO MTU: 48:10
        UP RUNNING PSCAN ISCAN INQUIRY
        RX bytes:293 acl:0 sco:0 events:42 errors:0
        TX bytes:1446 acl:0 sco:0 commands:42 errors:0
        Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'BlueZ (0)'
        Class: 0x3e0100
        Service Classes: Networking, Rendering, Capturing
        Device Class: Computer, Uncategorized
        HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x1fe
        Manufacturer: Integrated System Solution Corp. (57)
 
[root@localhost bluetooth]# hcitool scan
Scanning ...
Inquiry failed: Connection timed out
快速回复
限100 字节
 
上一个 下一个